Your shopping cart is currently empty.
Mactac REBEL RB228R 3mil Matte White Flexible Vinyl with Removable Adhesive 54"X150' on 3" Core 1 Roll (RB228RW54L150)
Item#:
MT01650
Our Price: $318.00
QUANTITY DISCOUNT PRICING
| Quantity | Discount |
|---|---|
| 2+ | 10% |
Free ground shipping within the Continental U.S.*
Mactac REBEL RB228R 3mil Matte White Flexible Vinyl with Removable Adhesive 54"X150' on 3" Core 1 Roll (RB228RW54L150)
Free ground shipping within the Continental U.S.*
RB228R is a 3 mil soft; non-top coated, matte white flexible vinyl coated with an acrylic removable adhesive. The liner is a 90# C2S polycoated that provides excellent lay flat. Designed for promotional screen and digitally printed graphic applications, indoor and out. The adhesive has a good initial tack and builds to a strong removable bond with good resistance to creep, solvents and heat.
RB228R uses include digital and screen-printed promotional labels, decals, markings, bumper stickers, point-of-purchase displays and signs for temporary indoor and outdoor use.
Printer Compatibility
- Latex
- Solvent/Eco-Solvent
- UV Curable
Applications
- Indoor Floor Graphics (smooth tile, concrete or linoleum)
- Indoor Signage
- Outdoor Signage
- Wall Murals
- Window Graphics
Physical Properties
| Property | Typical Values | Test Method |
| Thickness mil (mm) | ||
| Face + Adhesive | 4.2 mil (0.102) | |
| Face + Adhesive + Liner | 14 mil (0.279) | |
| Peel Adhesion lb./in. (N/25 mm) | ||
| Stainless Steel 30min. | 2.2 (9.6) | PSTC-1 |
| Stainless Steel 24hr. | 2.8 (12) | PSTC-1 |
| Quick Tack, lb./in2 (N/25mm) | ||
| Stainless Steel | 2.0 (8.7) | MACtac CTM-25 |
| Dimensional Stability, inches (mm) | ||
| 48 hours @ 158°F MD | 0.2 (5) | MACtac CTM-21 (Method D) Bonded to aluminum |
| 48 hours @ 158°F CD | 0.2 (5) | MACtac CTM-21 (Method D) Bonded to aluminum |
| Temperature Range | ||
| Application | 50°F (+10°C) | |
| End Use | -40° to 180°F (-40° to 82°C) | |
| Opacity | 78-82 | X-Rite Densitometer |
Durability
Five years indoors and up to 2 years outdoors. This use-life estimate is based upon accelerated age studies. Please note that exposure to severe temperatures, ultra-violet light and also in tropical, sub-tropical or desert regions will cause more rapid deterioration. This also applies to polluted areas, high altitude and south facing exposure.
Recommended Overlaminates for Usage on Floors
Overlaminates are critical to the success of a floor graphic. They protect and seal the image while offering excellent slip resistance for the creation of a safe walking surface. These laminating films can be applied over most properly printed and cured inkjet and screen printed images. Extra wet-out time may be required on some images to reduce silvering and build to a strong bond prior to rolling for shipment.
- Permacolor PermaFlex® IP6200, a 5-mil textured polycarbonate film, has superior abrasion resistance for high foot traffic applications and long-term installations. IP6200 is for indoor use only with a durability of up to three years.
- Permacolor PermaFlex® PF6300, a 5-mil textured vinyl with good abrasion resistance, designed for medium-term applications, one to three years indoors, depending on foot traffic.
- Permacolor PermaFlex® PF6400, a 3.75-mil extremely economical textured polyolefin for very short term, indoor only, application of up to 30 days with light foot traffic.
- Permacolor PermaFlex® PF6600, a 6-mil medium term textured vinyl with high Traction rating according to ANSI/NFSI B101.3 and B101.1. PF6600 is also the laminate to use inside if wet conditions are expected.
Shelf Life
Two years when stored at 75°F (24°C) and 50% relative humidity or less.